NEWMeroShare auto-sync is hereSee how →

Bollinger Bands, explained

Bollinger Bands draw a channel around the price that widens when it moves a lot and narrows when it is quiet.

4 min read

Three lines

Bollinger Bands are three lines drawn on a price chart.

Standard deviation is a measure of how far prices usually stray from their average. When prices swing a lot, it grows and the bands move apart. When prices are calm, it shrinks and the bands move closer.

  • Middle band: the 20-day simple moving average.
  • Upper band: the middle band plus 2 standard deviations.
  • Lower band: the middle band minus 2 standard deviations.

Reading the bands

Most closes land inside the bands. A close near the upper band means the price is high compared with its recent average. A close near the lower band means it is low.

Touching a band is not a signal by itself. In a strong uptrend, the price can ride along the upper band for many days.

Walking the band

When a stock closes near the upper band day after day, traders say it is walking the band. It is a sign of strength. Reading every touch of the upper band as a top would miss many strong runs.

The squeeze

When the bands get very close together, it is called a squeeze. It means the price has been unusually calm.

Calm periods often end with a bigger move, but a squeeze does not say which way. Traders wait for a close outside a band to see the direction.

Using bands with other tools

Bollinger Bands show where price sits compared with its recent range. Other tools fill in the rest.

  • Pair them with RSI to see if a move is stretched.
  • Check volume when price closes outside a band.
  • Use support and resistance for nearby levels.

%B and bandwidth

Two numbers sum up the bands. %B shows where the close sits: 0 is the lower band, 1 is the upper band and 0.5 is the middle.

Bandwidth is the distance between the upper and lower band as a share of the middle band. A low bandwidth means a squeeze.

Common mistakes

These are the habits that most often lead beginners astray.

  • Treating every band touch as a turn.
  • Ignoring the trend the bands sit in.
  • Guessing which way a squeeze will break.
  • Skipping the volume check.

A NEPSE example

On 27 Oct 2026, Nabil Bank (NABIL) closed at Rs 542. Its 20-day Bollinger Bands were: upper Rs 548.44, middle Rs 537.06 and lower Rs 525.68.

The close sat above the middle band and below the upper band, about 72% of the way up the channel.

The bands were about 4.2% apart, so the price had been fairly calm. They were not tight enough for StockYan to flag a squeeze. In the numbers above, %B was 0.72 and bandwidth was 4.24%.

Questions

What are the standard Bollinger Bands settings?

20 days for the middle band and 2 standard deviations for the outer bands. Most traders keep these, since they are what most charts show.

What does a Bollinger Band squeeze mean?

The bands have moved close together because the price has been calm. A bigger move often follows, but the squeeze does not show its direction.

Can I scan NEPSE stocks by Bollinger Bands?

Yes. StockYan's Bollinger scanner lists stocks in a squeeze or closing outside a band.